39
Noise/vibration information
Measured values determined in
accordance with EN 60745-1,
EN 60745-2-5.
The specified vibration emission value
was measured in accordance with a
standardised test procedure and can be
used in order to compare one electrical
tool with another.
The specified vibration emission value
can also be used for preliminary
evaluation of the disturbance.
CAUTION! The vibration emission
value may fluctuate from the
specified value during use of the
electrical tool. These fluctuations will
depend on the way in which the tool is
used.
Safety measures must be taken in
order to protect the operator. As a
result, the evaluation of the
disturbance must be made whilst
taking account of the actual conditions
of use. (All parts of the operating cycle
must be taken into account for this
purpose. This also includes times in
which the tool is switched off and
times in which it is switched on, but is
running without load.)
3 – Components
1
Handle
1a Additional handle
2
On/Off switch
3
Adjustment screw
4
Splitting wedge
5
Pendulum protective cover
6
Hexagonal screw
7
Saw shoe
8
Flange
9
Parallel stopper
10
Connection for dust extractor
11
Cutting angle adjustment
12
Cutting depth adjustment
13
Laser projector
14
Laser optic
15
Laser on/Off switch
16
Battery compartment cover
4 – Correct use
This circular hand saw may only be
operated in manual operation in a
domestic situation. It is suitable for use
with the supplied saw blade for straight
cuts in wood and wood materials in
accordance with the specifications
made in this operating manual. With the
suitable saw blades fitted (observe the
manufacturer specifications!) the
machine is also suitable for use with the
following materials: Plastics, thermal
and thermoset plastics, laminated
plastics, expanded plastic slabs,
plasterboard, rock wool slabs, cement-
bonded chipboard, aerated concrete
and non-ferrous metals. All other uses
are expressly excluded.
5 – General safety
instructions for handling
power tools
WARNING! Read all safety
warnings and all instructions.
Failure to follow the warnings and
instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings
refers to your mains operated (corded)
power tool or battery-operated
(cordless) power tool.
5453680-Handkreiss-man 30.01.14 07:16 Seite 39
