23
Chapter 5
Troubleshooting
Disconnect the appliance from the power supply and then turn it on again after at least 3 minutes.
If the appliance still does not work properly, please contact your customer service center or your
retailer.
Do not attempt to disassemble, modify or repair the appliance. This may cause an
electric shock, short circuit or fire.
Condition
Possible cause
Solution
Basic functions
Shower system does not
work
No power supply
Wait for the power supply to be restored
Damage to the electrical
connection
Shut down the water supply
Disconnect the power supply
Call service
RCD is off
Turn the RCD on
Standby mode off
Turn on the appliance by pressing the
button on the side panel
Water leakage
Shower system failure
Shut down the water supply
Disconnect the power supply
Call service
Remote control / Control knob
Remote control LED
flashes during operation
Low battery level
Replace the batteries
Remote control / Control
knob does not work
No battery
Install the batteries
Discharged batteries
Replace the batteries
Incorrectly inserted batteries
Insert the batteries correctly paying
attention to '+' and '-' poles
Remote control failure
Call the customer service helpline
Brak połączenia pilota zdalnego
sterowania / pokrętła sterującego z
bazą myjącą
Przeprowadź parowanie pilota zdalnego
sterowania / pokrętła sterującego (pkt.
3.1.2 i 3.1.4.)
