INSTRUCTION MANUAL
72
Switching On the hob:
Every display marks '0' and a flashing decimal point.
Switching Off the hob:
The display marks 'H', residual heat, if the zone is still hot.
If after 10 seconds no zone is selected the hob automatically switches off.
Increase to:
Increase the power level.
This sensor simultaneously with the decrease sensor switches off the zone
Decrease to:
Decrease the power level.
This sensor simultaneously with the increase sensor switches off the zone
Block to:
Block the use of sensors during use.
Block the use of sensors when the plate is off to avoid being accidentally switching
it on (children, cleaning ...).
To activate / deactivate this function the sensor should be pressed for 3 seconds.
Even with the block function active it is possible to switch off zones, one by one,
or all the hob simultaneously.
Sensor
Connect -
Disconnect
Sensor
Increase power
Sensor
Decrease power
Sensor
block
2.6. USE
Connect / Disconnect
To connect the hob press on / off button for 1 sec, after which there is an audible signal and 4 red dots appear one
by each zone awaiting selection.
If after 10 sec you have not selected a zone to be used, the hob automatically disconnects.
To disconnect the hob just press on / off button for 1 sec, after which there is an audible signal and the red dots
disappear from the display.
Summary of Contents for MPVINDMI1600
