INSTRUCTION MANUAL
66
Select a zone with time
When the timer is awaiting the selection of a zone, the zone can be selected by pressing the selector of the desired
zone. A sound plays and the plate's display flashes to indicate that the power has not been selected for the plate
in question.
The timer display starts to flash to indicate that the time has to be selected.
Only one zone can be chosen at a time.
Set the desired power level
Use the (+) sensor to select the desired power
Set the desired time on the timer with the (+) and (-) buttons
t
t
t
t
t
t
t
t
Summary of Contents for MPVINDMI1600
