For further information how to configure a virtual network interface, take a look at the LANTIME manual.
Removing the Network Extension from the LANTIME
In order to remove the LNE, simply remove the module from the slot it is installed at. As you will see,
the "PHYSICAL INTERFACES" will still show the LNE interfaces, even if they already have been removed.
Now log in to the LANTIME Command-Line-Interface using SSH, Telnet or a serial connection. Once you are
logged in, exexute the following command.
nicmgr autoremove ; saveconfig network
This will delete the interface out of the LANTIME configuration files. After that the webinterface should
display the "old" state again.
60
Date: 21st August 2019
IMS-M4000
