Meinberg GPS164-LQ/PPFO-3/REL-1/DAHS Manual Download Page 5 | Manualshive

Page: 5 / 46

Meinberg GPS164-LQ/PPFO-3/REL-1/DAHS Manual Download Page 5

Page 1

1 General Details

This manual contains important information for the installation and operation of
this device as well as for your safety. Make sure to read carefully before installing
and commissioning the device.

Certain operating conditions may require the observance of additional safety
regulations not covered by this manual. Nonobservance of this manual will lead to a
significant abatement of the security provided by this device. Security of the facility
where this product is integrated lies in the responsibility of the installer. The device
must be used only for purpose named in this manual, any other use especially
opteration above the limits specified in this document is considered as improper
use.

Keep all documents provided with the device for later reference.

This manual aims to qualied personnel only. Qualied personnel are those persons who are authorized to install,

commission and operated electrical systems and circuits in accordance with the respective national laws and safety

regulations.

Please note the following symbols:

Symbol

Beschreibung /

Description

IEC 60417-5031
Gleichstrom /

Direct current

IEC 60417-5032
Wechselstrom /

Alternating current

IEC 60417-5017
Erdungsanschluss /

Earth (ground) Terminal

IEC 60417-5019
Schutzleiterklemme /

Protective Conductor Terminal

Vorsicht, Risiko eines elektrischen Schlages /

Caution, possibility of electric shock

ISO 7000-0434
Vorsicht, Risiko einer Gefahr /

Caution, Danger

2002/96/EC

Dieses Produkt fällt unter die B2B Kategorie. Zur Entsorgung
muss es an den Hersteller übergeben werden.

This product is handled as a B2B category product. In order to
secure a WEEE compliant waste disposal it has to be returned
to the manufacturer.

GPS164

Date: 27th January 2016

1

«
...
3
4
5
6
7
...
»

Summary of Contents for GPS164-LQ/PPFO-3/REL-1/DAHS















































Reviews:

No comments