manualshive.com logo in svg

Meinberg GPS164-LQ/PPFO-3/REL-1/DAHS, Manual, Page: 46 / 46

Share
Download
Meinberg GPS164-LQ/PPFO-3/REL-1/DAHS Manual Download Page 46

Konformitätserklärung

Declaration of Conformity

Doc ID: GPS164-LQ/PPFO-3/REL-1/DAHS-18112015

Hersteller

Meinberg Funkuhren GmbH & Co. KG

Manufacturer

Lange Wand 9
D-31812 Bad Pyrmont

erklärt in alleiniger Verantwortung, daß das Produkt 

declares under its sole responsibility, that the product

Produktbezeichnung

GPS164-LQ/PPFO-3/REL-1/DAHS

Product Designation 

auf das sich diese Erklärung bezieht, mit den folgenden Normen übereinstimmt 

to which this declaration relates is in conformity with the following standards

EN55022:2010, Class A

Limits and methods of measurement of radio interference 
characteristics of information technology equipment

EN55024:2010

Limits and methods of measurement of Immunity characteristics of 
information technology equipment

EN 61010-1:2010,

Safety requirements for electrical equipment for measurement, control

CAT II, Poll 2

and laboratory use

EN 50581:2012

Technical documentation for the assessment of electrical and electronic 
products with respect to the restriction of hazardous substances

gemäß den Richtlinien 2014/30/EU (Elektromagnetische Verträglichkeit), 2014/35/EU 
(Niederspannungsrichtlinie), 2011/65/EU (Beschränkung der Verwendung bestimmter gefährlicher 
Stoffe) und 93/68/EWG (CE Kennzeichnung) sowie deren Ergänzungen. 

following the provisions of the directives 2014/30/EU (electromagnetic compatibility), 2014/35/EU (low voltage directive), 
2011/65/EU (restriction of the use of certain hazardous substances) and 93/68/EEC (CE marking) and its amendments.

Bad Pyrmont, den 18.11.2015 

Summary of Contents for GPS164-LQ/PPFO-3/REL-1/DAHS















































Reviews:

No comments