Meilhaus Electronic ME-5000 series, Manual

Page: 34 / 38

Rev. 1.1E Manual ME-5001
Pinout Page 34 Meilhaus Electronic
B2 Additional Sockets (ST2/ST3)
For adaption from ST2 (DIO_16..31) resp. ST3 (DIO_32..47) to a 25-
pin D-sub female connector one resp. two optional mounting brackets
are required. Use type ME-AK-D25F/S for PCI Express slots resp. ME-
AK-D25F/S(cPCI) for CompactPCI slots.
Please note when plugging on the flat ribbon cable, make sure that pin 1
of the flat ribbon cable (red marked line) is connected on to the IDC
socket ST2 resp. ST3 as shown in diagram 12.
Diagram 12: Connecting the additional sockets ST2/ST3
20-pin IDC socket for ST2 and ST3
Pin Labeling (ST2/3) Pin Labeling (ST2/3)
20 DIO_17 / 33 19 DIO_16 / 32
18 DIO_19 / 35 17 DIO_18 / 34
16 DIO_21 / 37 15 DIO_20 / 36
14 DIO_23 / 39 13 DIO_22 / 38
12 DIO_25 / 41 11 DIO_24 / 40
10 DIO_27 / 43 9 DIO_26 / 42
8 DIO_29 / 45 7 DIO_28 / 44
6 DIO_31 / 47 5 DIO_30 / 46
4 GND_PC 3 GND_PC
2 VCC_OUT 1 VCC_OUT
Table 4: Pinout of the 20-pin IDC socket (ST2/3)
ST1
ME-5001
REV.: 1.3
cPCI PCIe
ST2
ST3
1 2
1
2
19 20
18
16
14
12
10
8
6
4
2
17
15
13
11
9
5
3
1
7
1
1