WasteStar installation operating instructions FC
9670512
Design and construction subject to change without prior notice!
Page
14
of
40
•
after the installation, setting in operation and handing-over of installation to the
customer/operator further modifications are not allowed (f. ex. electrical
changes or changes to reg. location). Modifications of the plant, especially of a
technical nature performed without the manufacturer's written approval, and
by unauthorised persons, lead to complete loss of your warranty entitlement
and void product liability.
5.3
Basic safety measures
DANGER
Risk of injury due to electric shock, damage to property.
Parts carrying electric current as well as moving or rotating parts can cause·
Dangers to the user’s life and limb and material damage.
Danger can arise from the improper use of the installation or if it is used for pur-
poses for which it was not intended.
The installation may only be operated by adequately qualified staff who have
been trained by the operating company and who have been trained about the
Hazard and Safety Instructions.
When electrical equipment is in operation, it is inevitable that certain parts carry
a dangerous current.
All current to the whole installation must be switched off before the machine’s
cladding or electrical equipment is opened.
PLACE THE MAIN SWITCH IN THE “OFF“ POSITION and install suita-
ble security measures to prevent the switch from being switched on.
Works or repairs on electrical parts of the installation are to be performed only
by specialists. Observe accident prevention rules.
You must not restart the system until after replacing
all detachable panels
!
•
Qualified staff
, as defined by the Operating Instructions, are persons:
–
who are over 14 years of age
,
–
who have read and who observe the safety instructions and the operating
instruction,
Summary of Contents for WasteStar FC
Page 40: ......
