Meiko K-Tronic, Operating Instructions Manual

Page: 31 / 44

Operating instructions dishwashing machine model K-Tronic
Datei:BA-K-tronic_MIKE_9626212_EN_2005-12-01.doc
9626212 31/44
W e reserv e the right to change execution and construction !
MEIKO Maschinenbau GmbH & Co. KG, Englerstraße 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
Fault: Remedy
Formation of a significant
amount of foam in the
wash tank

Detergent for dish-washing by hand enters the wash
tank because of pre-cleaning the dishes

Daily cleaning of the machine is carried out with
foaming cleansing agents which afterwards enter the
machine

Improve pre-wash, as too much food residue is
entering the tanks Alternatively, empty wash tanks
between uses.

Rinse water quantity too low

Detergent or rinse aid product not suitable

Temperatures too low < 40°C
13 Staff training
Only trained and instructed personnel are allowed to work on the dishwashing machine.
The skills required by the personnel for the installation’s operation, maintain and repair
must be clearly established.
Any personnel undergoing training are only allowed to work on the dishwashing machine
installation under the supervision of an experienced person.
persons Trained operating
personnel
Trained
company
tradesman
Trained company
tradesman or
installation engineer
Activity
Installation and assembly

Commissioning

Operation, use

 
Cleaning

 
Checking safety devices

 
Fault finding
 
Troubleshooting,
mechanical
 
Troubleshooting,
electrical

Maintenance 
Repairs
 
Such training should be confirmed in writing.
14 Disposal of the installation
When you eventually dispose of the installation (dismantlement/scrapping), the parts and
their corresponding materials should preferably be re-used.
Here is a list of the materials that most frequently occur when dismantling:

Chrome-nickel-steel

Aluminium

Copper

Brass

Electrical and electronic parts

PP and other synthetic materials

Chrome-nickel steel