Meiko K-Tronic, Service Manual

Page: 80 / 248

Rinse result poor
1.2
1_2_Rinse result poor.doc Update: 20.06.2006
Defective components!
Cause Remedy
Rinsing water quantity too low Clean dirt trap
Rinsing arms missing /
incorrectly installed Insert / install rinsing arms correctly
Rinsing nozzles missing Insert nozzles
Rinsing nozzles set at wrong
angle Set rinsing nozzles at correct angle
Rinsing nozzles blocked Clean nozzles
Boost pump defective Check pump, change if necessary
Check power supply, repair if necessary
Rinsing dosage device defective Check function, change dosage hose or device if
necessary
Loose deposits on washed items!
Cause Remedy
Rinsing water quantity too low Increase rinsing water quantity
Basket unsuitable Use suitable inserts
Incorrect sorting of dishes in
basket,
spray marks See operating instructions
Tank water too heavily polluted Filter system missing or damaged
Pre-clearing insufficient
Residues / marks on the dish-ware, unsatisfactory result after drying
Unsuitable rinse agent Rinse agent must be suitable for the water quality and
the dish-ware/cutlery.
Ask your chemical supplier for advice
Rinse agent quantity too low Adjust the rinse agent dosing.
See Operating Instructions
Rinse temperature too low Check the boiler heating element. Replace if necessary.
Set the boiler temperature.
See the Operating Instructions