background image

Service Instructions Dishwashing Machine Model K-Tronic 

 

 

 
 

 

Ident No.: 9627429

Page 11/30

 

Information output

 

Note 

Next maintenance in

 

Operating hours till next maintenance 

Total Operation time 

Counting up in the operating conditions 
Filling/Heating/Ready for op./Operation 

Running time  

Wash pumps 

Counting up while WP ON; 
Applies as reference for maintenance! 

Running time 

Drying fan 

Counting up while fan ON; 

Number of baskets 

If basket counter available; 

FR water consumption 

Display with one decimal place 

FR water flow 

Current actual value 

FR2 water consump. 

Display with 1 decimal place 
(Only if available) 

FR2 water flow 

Current actual value 
(Only if available) 

Water consumption 

filling valve

 

Only if water meter available (see separate 
parameter) 

Temperature PW 

Actual temperature prewash tank (PW) 
(Only if available) 

Temperature WT6 

Actual temperature wash tank 6 (WT6) 
(Only if available) 

Temperature WT5 

Actual temperature wash tank 5 (WT5) 
(Only if available) 

Temperature WT4 

Actual temperature wash tank 4 (WT4) 
(Only if available) 

Temperature WT3 

Actual temperature wash tank 3 (WT3) 
(Only if available) 

Temperature WT2 

Actual temperature wash tank 2 (WT2) 
(Only if available) 

Temperature WT1 

Actual temperature wash tank 1 (WT1) 
(Only if available) 

Temperature PAR 

Actual temperature pump final rinse (PAR) 
(Only if available) 

Temperature FR 

Actual temperature final rinse 1 (FR) 

Temperature FR2 

Actual temperature final rinse 2 (FR2) 
(Only if available) 

Temperature Drying 

Actual temperature drying 
(Only if available) 

Serial number 

Option for calling up works parameters  

Order number 

Option for calling up works parameters  

 Heat pump 

deactivated 

or 

Defrosting 

in operation 

or 

Power regulation in 

operation 

Or 

Defrosting

 

/ Power 

regulation in operation

or 

Hot gas by-pass OFF 

Only if a heat pump is available 
Output depending on the status of the entries 

low 

pressure switch 
defrosting 

or

 high pressure switch 

power regulation

 

 
 

 

6.3  I/O Status OUTPUT 

When the machine is in the operating conditions 

Machine Off, Fill/Heat, Ready for 

Operation, Operating

 and 

Pumping out,

 it is possible (option) to obtain information on 

the status of digital inputs and outputs and the temperatures of an I/O module in the 1

st

3

rd

 and 4

th

 lines (the 2

nd

 column continues to display the operating condition).    

Datei: 2K_9628652_Serviceanleitung-MIKE_EN_2005-09-01.doc

 

valid from: 2005-09-01

 

Update: 2006-11-14 / S.5

 

 

 

W e reserve the right to change execution and construction!  

MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1174

 

Summary of Contents for K-Tronic

























































































































































































































































Reviews: