Service Instructions Dishwashing Machine Model K-Tronic
Ident No.: 9627429
Page 5/30
2
General safety instructions
2.1 Operator's duty of care
Measures to ensure the safe operation of the machine:
The operator must ensure in particular that ...
... … in order to preserve the operational and safety guarantees, whenever required, only
original parts supplied by the manufacturer are used.
…the user will lose the right to any possible claims if the appliance is modified using any
parts other than original parts.
...... a functional test on all safety systems of the machine is carried out during every
regular maintenance.
Be careful when closing the wash-chamber door.
Do not catch your hand!
You must not make
any alterations
after the assembly, commissioning and the hand-
over of the machine to the customer/operator (e. g. electrical connection, supply of
water, steam, connection to waste water or position)
.
Modifications of the appliance,
especially technical modifications without the written approval of the manufacturer and
from non-authorized persons lead to the total
loss of the right to claim under the
guarantee
and invalidate our product liability
.
ATTENTION!
ATTENTION!
2.2 Fundamental safety measures
Danger can arise from the improper use of the cleaning and disinfection machine or if it is
used for purposes for which it was not intended.
Parts carrying electric current as well as moving or rotating parts can cause
•
Dangers to the user’s life and limb and
•
Material damage
ATTENTION!
The machine operates with hot water.
Avoid all contact with the rinse water.
There exists therefore the
danger of scalding.
As
a result, the dishes etc being washed are at high temperature.
Take suitable precautions.
Observe all the instructions posted on the machine.
WARNING!
When electrical equipment is in operation, it is inevitable that certain parts carry a
dangerous current.
ALL current to the whole machine MUST be switched off before the machine’s cladding
or electrical equipment is opened.
PLACE THE MAIN SWITCH IN THE “OFF“ POSITION and install suitable security
measures to prevent the switch from being switched on.
Work on and rectification of malfunctions on the electrical portion of the appliance must
only be carried out by specialists who have been trained and authorised by MEIKO. The
Health and Safety Regulations must be observed.
The machine, switch cabinets and other electrical components must NOT be sprayed
with a hose or a high pressure cleaner.
Repairs and maintenance on the cleaning and disinfection appliance must only be carried
out by specialists who have been trained and authorised by MEIKO.
ATTENTION!
Work and malfunction rectification on the steam installation must only be carried out by
specialists.
Datei: 2K_9628652_Serviceanleitung-MIKE_EN_2005-09-01.doc
valid from: 2005-09-01
Update: 2006-11-14 / S.5
W e reserve the right to change execution and construction!
MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1174
Summary of Contents for K-Tronic
Page 1: ......
