MeiG Smart product technical information
SLM758
Hardware Design Guide
Page 48
Figure 4.19
：
MIPI Camera Reference Circuit
Important note: When designing the camera function, you need to pay attention to the
position of the connector. There will be a small person in the specification of the camera to
indicate the imaging direction. You need to ensure that the villain is standing on the long side
of the LCD, otherwise the camera will be flipped. The software cannot be adjusted at 90°. As
shown in the two figures below.
Figure 4.20
：
Camera imaging diagram
SIM
卡座
SIM
卡座
