CashFlow
9520 / 9524 / 9528 Design Guide
MEI., 2003
Page
42
Rev: G1
Power Supply Input Protection
Overcurrent protection is not included in the product and must be provided as part of the
machine.
Recommended fuse rating at the rated supply of 12V is:
3A Slow blow EN60127
Other protection methods may be used providing their over current characteristics remain
within the overall operating characteristics of the above fuse.
Mechanical Parts
The product will not contain mechanically moving parts, or sharp edges, which can prevent
a hazard in normal use.
Coin Sizes
CashFlow
®
9524 and CashFlow
®
9528 will be able to validate and route coins within the
following range:
Circular coins, in the range 15mm to 31.5 mm in diameter.
Circular coins, in the range 1.1mm to 3.2mm in thickness.
Faceted coins within the relevant coinsets will also be handled.
Damaged, bent or very distorted coins may not be validated.
Coin Acceptance Rate
The acceptor will validate coins at up to 3 coins per second, when linearly separated i.e.
>330 ms apart. After a coin has been rejected, no further coins will be accepted for a period
of 0.5 seconds. Should a further coin be entered during this period, the reject period will be
reinitiated.
Summary of Contents for CASHFLOW 9520
