CashFlow
9520 / 9524 / 9528 Design Guide
MEI., 2003
Page
29
Rev: G1
Output Timings
BCO Mode is indicated by the A output being permanently active. This indicator can take up
to 100 milliseconds to be established from power up. In order to ensure reliable operation of
the host machine (i.e. coin mech. might be changed without powering down) the state of this
output should be regularly polled. As long leads are often involved in a coin mechanism
interfaces, it is recommended that the input should be de-bounced in software to avoid
glitches.
Coin Inhibits
High = Coin inhibit
Low = Coin enable
Maximum input voltage to enable channels (logic 0)
<1.0V
Minimum input voltage to inhibit channels (logic 1)
>4.0V
Input impedance
12Kohms to +5v.
Output
Common
Output A
T(o/p valid)
BCO Output Indication
= 100 milli-seconds (max)
Vsupply
Output
Mode Select
Output
Common
Output
T(o/p valid)
Output
Output
Common
Positive Common
Negative Common
= 15 micro seconds
Other
Outputs
Other
Outputs
to be Set
to be Set
o/p off
o/p on
o/p on
o/p off
Summary of Contents for CASHFLOW 9520
