BD0333JE
ZP-BD03E
MOM2
19
4 FUNCTIONS AND SET UP
4.8 PC communication – PC
COM
The PC COM position is used for all operations per-
formed from a PC using MOM2 Win. you can:
▪
Dump measurement data from the MOM2
▪
Delete all measurements in the data log
▪
Program "User" positions
▪
Set MOM2 clock
▪
Calibrate
PC COM
Display abbreviations
rEn
Remote
Set-up
The following is needed:
▪
A PC with MOM2 Win installed
See chapter 8 MOM2 Win
▪
A PC connected via Bluetooth
See section "Bluetooth set up"
4.9 Audio signals
The MOM2 emits different sounds to give an audible
information / confirmation of an event / action. The
sound is emitted from a built-in buzzer and from the
Bluetooth headset (optional). The audio signals vary in
frequency, Low / High, and composition.
Audio signals
Description
◼ ◼ ◼
. . .
The MOM2 is charging the
capacitor and is not ready for
measurement.
◼
◼
◼
◼
. . .
Battery low
During capacitor charge
◼◼
Measurement in progress
◼
◼
Pass signal
Measurement complete / Pass
Wake up
◼◼
◼
Fail signal
Measurement complete / Fail
Label full
Stand-by
◼
When pressing Test / Trigger
while lock symbol is shown
◼ ◼◼
Delete confirmed
When press and hold the
Test / Trigger
Note: Only in LOG mode
◼
◼
Hold
When pressing Test / Trigger
Note: Only in LOG mode
◼
◼
Release
When pressing Test / Trigger
Note: Only in LOG mode
Legend
◼
Short - High tone
◼◼
Long - High tone
◼
Short - Low tone
◼◼
Long - Low tone
. . .
Continuous
www.
.com
1.800.561.8187
