MegaTech Night Flyer, Flight Manual

Page: 4 / 16

4
PACkAgE CONTENTS
Before getting started you will need:
• 8 “AA” 1.5V Alkaline batteries
(sold separately)
First make sure the contents of your package are complete:
A. Fuselage
B. Main Wing
C. Transmitter
D. Transmitter Antenna
E. Battery Flight Pack
F. Charging Cord
G. Wind Detection Ribbon
H. Propellers (4pc)
I. Landing Gear
J. Wing Bands
FINAL ASSEMBLY
CONNECT THE LIGHTS
1) Before attaching the main wing to the plane, insert the
red connector on the wing into the red connector on
the fuselage.
2) Next, tuck connector with wires inside the fuselage
making sure that no wires are exposed outside the
plane.
ATTACHING THE WINGS
1) Place the Main Wing onto the fuselage with wing tips
angled upwards.
2) Line up the arrows on the center of the wing so they
are pointing to the seam on the fuselage and then
snap into place.
3) Connect the wing bands to the posts on the fuselage
and wrap them across the wing as follows. First attach
a wing band from A to D and then attach a wing band
from B to C as shown to the right.
ATTACHING THE PROPELLER
1) Push propeller onto fuselage prop shaft.
IMPORTANT: Make sure there is approximately 1/8in. between the
propeller and the fuselage. The propeller should not be touching the
screws on the front of the fuselage.
B.
D.
A.
C.
Decal Towards
Front
A.
B.
C.
E.
F.
G.
D.
H.
H.
J.
I.
Leave
Space