![background image](http://html1.mh-extra.com/html/megasat/royal-line-32/royal-line-32_user-manual_1765192049.webp)
7. The Main Menu
15
ENGLISH
Transponder
Delete (RED button)
Deletes the selected transponder. Confirm the
irrevocable deletion by clicking OK.
Edit (GREEN button)
To change the frequency, the symbol rate and the
polarity of the selected transponder. Confirm with OK.
New (YELLOW button)
Add a new transponder. Enter the frequency, symbol
rate and polarity of the new transponder.
Confirm with OK.
Search (BLUE button)
Start the search with the selected transponder. Select
the search mode, the transmitter and the service type.
Confirm with OK.
Antenna setting
LNB type
Change the LNB type
LNB power
Change the LNB power supply.
22 KHz
Set the 22 KHz on or off.
Toneburst
Select between No, Burst A and Burst B
DiSEqC 1.0
Select between No, LNB 1 to LNB 4
DiSEqC 1.1
Select between No, LNB 1 to LNB 16
Motor
Select between No, DiSEqC 1.2 or 1.3 (USALS)
Note:
Usually you have to make no changes in the antenna settings. It is recom-
mended that only experienced users change settings.
Note:
As new Channels are available, but these are not located in your TV list, proceed as
follows:
1. Find out the frequency of the new channel (e. g. on „
www.satindex.de
“).
2. Go to the main menu
Channel
->
Dish Setup
.
3. Select the satellite (e. g. Astra 19.2E) and click OK.
4. Now select the transponder from the list (e. g. 12.188 H 27.500) and click OK to
confirm.
5. Press the BLUE button to start searching on this Transonder.
Summary of Contents for Royal Line 32
