Megasat Royal Line 32, User Manual, Page: 43 / 104

1. Connect the TV to the power supply and turn on the power switch at the bottom of
the housing. The TV is now in standby mode (LED is RED).
2. Then press the Power button on the re-
mote control (LED is GREEN).
3. After the TV is started, the First Installation
menu appears. You can now make the fol-
lowing settings:
• Language: Select a language for the OSD. To modify, use the
t u
keys.
• Country: Select the country. To modify, use the
t u
keys.
• Home-state: Select the display attribute of the TV:
Home-mode = dynamic and high-contrast colors
Store Mode = neutral colors
• Auto power off: Set here if the TV should turn off automatically if no
operation is performed on the unit.
• OK button: Starts „Auto Tuning“ for Terrestrial, Cable or Satellite television.
09
ENGLISH
5. First installation
Tuning Setup
Defaults for signal search
Reception mode: Use the
t u
keys to select the reception mode
ATV (analogue) and/or DTV (digital)
Digital Typ: Choose between Satellite, DVB-C or DVB-T
Have you made all the settings, start the channel search with OK.
Scan Typ:
Full
Sorting by LCN:
On
Sorting by LCN:
On
Satellit:
Astra 19.2° Ost
Search mode:
Standard
Channels type:
Alle Kanäle
Service type:
Alles
DVB-S (Satellit) DVB-C (Cable) DVB-T (Terrestrial)
(LCN is an automatic channel
sorting)
(LCN is an automatic channel
sorting)