![background image](http://html1.mh-extra.com/html/megasat/hd-935/hd-935_user-manual_1765162025.webp)
12
13
ENGLISH
ENGLISH
4. Main Menu
4. Main Menu
Channel search
In this menu item you can select different search options:
• All programs
• Free programs
• HD programs
• SD programs
• TV programs
• Radio programs
• FTA TV programs
• FTA Radio Programs
Transponder:
Just look on the selected Transponder.
Satellit:
Searches all stored transponders of the selected satellite.
Multi-Sat:
Scans all selected satellites.
Blind Scan:
Finds the satellites from all transponders, even those that are not stored in the list. This
process will take some time to complete.
Multi-Transponer:
Searches for all satellites on the selected transponder.
Start channel search
After you have set all the relevant positions in the antenna menu, you can now search for
programs. You can use various search functions:
2. Delete satellite channels
In this menu, you can delete unwanted channels lists matching the selection.
3. USALS setup
In this menu you can adjust to your USALS
to operate your antenna with a motor.
4. Factory setting
Here you can delete all settings and channels and set back to factory condition. If the
option is selected and confirmed with OK, you are prompted to confirm this. If you select
„YES“, all data and settings are reset to the factory preset values . All the settings you have
made will go irrevocably lost.
Motor
Use the
t
u
buttons to select the control of your motor. If you enable this option and
then press OK, you can make further adjustments to the position of the mirror adjust:
Move Auto [W/E]
Press RIGHT/LEFT button, the dish will be motorized to East/West continuously, it will
stop until it find the best signal.
Move Continue
Press RIGHT/LEFT button, the dish will be motorized to East/West continuously until you
press LEFT/RIGHT again.
Move Step
Press RIGHT/LEFT button, the dish will be motorized to East/West by step.
Store Position
Save the current position you searched for the selected satellite.
Go to Position
Press OK button to move the dish to the stored position.
Go to Reference
Press OK button to move the dish to 0 position.
Set West Limit
Enable West limit.
Set East Limit
Enable East limit.
Disable Limit
Disable West limit and East limit.