25
ENGLISH
5. Installing a Hard Drive, Record and Twin Tuner
24
ENGLISH
5. Installing a Hard Drive, Record and Twin Tuner
5.2 Record
5.3 Tuner settings for the twin mode
There are three different ways to start
recording: direct recording, manual pro-
gramming a timer, or a timer program-
ming via the EPG. Up to 12 timers can be
programmed. In Twin operation simulta-
neous recording of 2 timers is possible.
During recording the media player
functions are not available.
When using two connections, you can see any program while recording. When using
only one coaxial line is a limited program selection. Please refer to the settings of your
connection. Only correct setting both tuners are used.
Directly record
Press the record button on the remote control. The set-top box will start recording on
the current program. The recording is set by default to 2 hours. Again to press the record
button, you can adjust the recording time.
Programming timer manually
Press the Menu button, select the „Timer“ option and confirm with OK. Select „Event Ti-
mer“ and confirm with OK. Press the RED button to add a timer. The timer options appe-
ar. Enter now step by step your timer options and press OK to save the timer. With Exit
you can cancel.
Note:
The set-top box switches in standby
mode for about 5 minutes before the
start, and start recording at the pro-
grammed time. In normal operation,
the set-top box switches to the pro-
grammed program and start recording.
Date:
Use the numeric buttons on the remote control to enter the
required date.
Start:
Use the numeric buttons on the remote control to enter the
desired start time.
Stop:
Use the numeric buttons on the remote control to enter the
End time of the recording.
Repeat:
Choose how often the recording should be repeated. You can
choose between: 1 times, daily, weekly, Mon-Fri, Sat-Sun.
Standby after end: Select whether the set-top box after record is switch to standby
mode.
Record:
Select whether the programmed timer should be switched on
the program, to example a program not missing or if an external
recording device (DVD/Video recorder) is connected, or whether
the device must start a record on an attached hard drive.
(YES for recording and NO to toggle)
Confirm:
Confirm the settings with OK.
Timer programming via EPG
Select the desired channel and press the EPG button on the remote control to open
the electronic program guide. The current station is outlined in yellow. With the
t
u
buttons you can select the desired day. Press the OK button to go to the right to select
the desired program. Use the
pq
buttons to select the broadcast. Press the RED button
to accept the selected program in a new timer. If necessary, you can adjust the timer
setting (see manual programming a timer).
Go in the menu to „Install“ (password: 0000) -> Antenna connection. There are two
connection types: Dual (Different) or Single.
When operating with two coaxial cables, mode Dual (Different) is to be selected. Press
EXIT to exit the menu and then select the antenna settings.
Select the „Tuner“ and make them the choice to „Tuner 1/2“ to both tuners to activate
the twin operation. The setting „LNB type“ adjust according to your system. The default
setting is „Universal“.
Note: It is possible to prove tuner 1 and tuner 2 with different modes of operation.
Example: Tuner 1 (Universal) and Tuner 2 (unicable).
Note:
The recording function, as well as the Twin Tuner
operations exist only on the Megasat HD 935 Twin
Program:
Press OK and the channel list appears to select the desired
program or use the
t
u
buttons to select the desired program.