ENGLISH
ENGLISH
08
09
3.1 Search
3.1.1 Satellite
3.1.2 LNB type
3.1.3 Low Freq / High Freq
3.1.4 TP Num
3.1.5 Frequency:
Frequency of the current transport,Input
the value by using the numeric keys.
3.1.6 Symbol Rate:
Symbol rate of the current transport, Input the value by using the numeric keys.
3.1.8 Polarity:
Press key to change Vertical or horizontal of polarization.
3.1.9 22K Tone:
Press key to select 22K Tone ON/OFF
3.1.7 LNB Power:
Press key to select the desired option. If your meter is connected to another recei-
ver through LOOP THROUGH support, in case the other receiver is directly connected to
the LNB, then select OFF.
3.1.10 DiSEqC1.0:
Press key to select the DiSEqC1.0 mode (OFF/ LNB1 /LNB2/LNB3/LNB4 )
3.1.11 DiSEqC1.1:
Press key to Select the DiSEqC1.1 mode (OFF/ LNB1 /LNB2/LNB3/LNB4 / LNB5 /
LNB6/LNB7/LNB8/LNB9/LNB10/LNB11/LNB12/ LNB13 /LNB14/LNB15/LNB16)
3.1.12 Toneburst:
Press key to select the Toneburst mode (OFF/ A / B)
3.1.13 Longitude:
Use the numerical keys to input Longitude of Satellite
3.1.0.1 Quick Search:
In the satellite search interface, pressing OK key will enter the quick search.
Press OK key enter the satellite list. Use key to move the cursor, then press OK key
to select the satellite that you want.
Press key, you can select Normal C/
Normal Ku/ Universal, according to your physical LNB type.
Enter the proper LNB frequency referring to your LNB using the numeric keys or
pressing key.
Press OK key into the TP list. Use key
to move the cursor then press OK key to
select thesatellite that you want.
If you set the My Longitude and My Latitu-
de, the angle of LNB, the orientation and
elevation of antenna,all will be displayed on
the screen. Press key to select Tp Scan,
Auto Scan, Zoom, then press OK key into
function.
