![background image](http://html1.mh-extra.com/html/megasat/4046173107913/4046173107913_user-manual_1765147040.webp)
Hereby, Megasat Werke GmbH declares that the following product is in compliance with
the essential requirements and other relevant provisions of directives 2014/30/EU (EMC),
2014/35/EU (LVD) and 2014/53/EU (RED):
Megasat HD 935 Twin V2
(Art-No. 0201130)
Megasat HD 935 Twin V2 (500 GB HDD)
(Art-No. 0201132)
Megasat HD 935 Twin V2 (1000 GB HDD)
(Art-No. 0201133)
Megasat HD 935 Twin V2 (2000 GB HDD)
(Art-No. 0201134)
Megasat HD 935 Twin V2 (250 GB SSD)
(Art-No. 0201135)
Megasat HD 935 Twin V2 (500 GB SSD)
(Art-No. 0201136)
Megasat HD 935 Twin V2 (1000 GB SSD)
(Art-No. 0201137)
The Declaration of Conformity for these products is located at the company:
Megasat Werke GmbH, Industriestraße 4a, D-97618 Niederlauer
The declaration of conformity can be downloaded from our homepage:
www.megasat.tv/support/downloads
38
39
ENGLISH
ENGLISH
8. Additional information
Conformity information
From time to time the firmware of the set-top box will be changed and improved. To
update the set-top box with a new firmware version, proceed as followss:
Firmware-Update via USB:
On our Homepage
www.megasat.tv
the
latest firmware is available as download.
Download the ZIP file, unpack the archive
and copy the
*.bin
file to a previously for-
matted USB stick.
8.3 Updating the Firmware
To accept all settings of the new firmware, you must perform a factory reset
(check „5. Factory settings“ on page 13).
Note:
When downloading the firmware, always pay attention to the correct name of the
file that matches your device (e. g.
megasat_hd_935_twin_v2_firmware.zip
)
Attention:
After a factory reset, all settings and the current channel list are lost. You can
save the channel list
BEFORE
the factory setting and then restore it (check „6. Managing
the program list“ on page 16).
1. Plug the USB stick into the receiver and press the USB button on the remote control
to enter the USB menu.
2. Select the file and confirm with OK.
3. You will be asked if you really want to upgrade? Confirm with „Yes“.
4. The firmware will be updated now.
5. After successful update the receiver will be restarted.
PRODUCT REGISTRATION
Registering your Megasat product gives you access to our automatic e-mail
notifications. If your product requires new firmware, you will be notified by e-mail.
For registration please visit our homepage
www.megasat.tv
You can find the form in
Support
a
Product registration