![background image](http://html1.mh-extra.com/html/megasat/4046173107913/4046173107913_user-manual_1765147035.webp)
29
ENGLISH
28
ENGLISH
6. Recording / Playback / Timeshift / Twin Tuner
6. Recording / Playback / Timeshift / Twin Tuner
6.2 Playback
6.3 Timeshift
6.4 Twin Tuner operation
In the menu change to
Installation
(Pass-
word: 0000)
u
Antenna connection
.
There are two connector types to choose
from: Dual (Different) or Single. When ope-
rating with two coaxial cables, the opera-
ting mode „Dual Different“ must be selec-
ted. With Exit you exit the menu and then
select the
antenna settings
. Select the
item
Tuner
and set the selection to „Tuner
1/2“ to activate both tuners for the twin mode. The „LNB Type“ setting is set according to
your system. The default is Universal.
With the Timeshift feature, you can pause a
TV show and resume it later. During the TV
program, press the pause button on
the remote control. Then the TV program is
paused and continued in the background.
If you want to continue watching from this
point, press the PLAY button on the remote
You can also customize the timeshift op-
tions. To do this, press the
USB button
on
the remote control. Then use the
BLUE
button
to change to the
PVR settings
.
Choose z. For example, set „Auto Times-
hift“ to ON to enable permament times-
hift. Under „Save Timeshift“, select whether
the recordings should be saved or not.
3. Timer programming via EPG
Select the desired program and then press
the EPG button on the remote control to
open the electronic program guide. The
current station is outlined in yellow. Use
the
t
u
buttons to select the desired day.
Press the OK button to go to the right side
to select the desired program. Use the
pq
buttons to select the program. Press the
RED button to transfer the program to the
timer list. If necessary, you can adjust the
timer setting (see manual programming of
a timer). The programmed program is then
highlighted in green.
The recordings are located on your USB
medium in the folder
ALIDVRS2
. To start
recording, switch to the USB menu with
the USB key. Then switch to the
ALIDV-
RS2
folder with the OK button (alterna-
tively, you can also press the play button
(
u
) in normal TV mode). Now select a re-
cording with the arrow keys and press OK
to start the playback.
control. Now you also have the option of fast forwarding or rewinding the TV program
(only within the time that was recorded in the background). To stop Timeshift completely,
press the Stop button on the remote.
Note:
It is possible to assign Tuner 1 and Tuner 2 with different operating modes.
Example: Tuner 1 (Universal) and Tuner 2 (Unicable).
Note:
Please note, if you operate the receiver with a Unicable system and want to
use the Twin mode, both tuners must also be connected. Use a 2-way splitter or pow-
er-pass splitter for this purpose.