Megasat 4046173107913 User Manual Download

Page: 26 / 41

ENGLISH

Transponder

Press the OK button to enter the list of pre-
set transponders. Use the

buttons to

select a transponder, with the

but-

tons you can at select the symbol of the
bottom of the screen for editing and to the
respective transponder. The processing is
performed in the same manner as the pro-
cessing of the satellite.

4. Main Menu

Note:

It often happens that tv channel change their frequency or a new transponder

is provided which is not in the stored list. To receive the stations continue, they must
be searched manually.

Search Individual tv channels according to a transponder:
Select Antenna Setting -> Transponder and press the OK button. Select from the list
the corresponding frequency of the tv channel you want to find and confirm with OK.
The frequency of the respective transmitters can be found for example on the web-
site: www.satindex.de. Then go with

buttons to the point „Start Scan“ and then

select with the

buttons „TP Scan“. Confirm with OK. If a message box appears

asking if you want to delete existing programs, select „No“ and confirm with OK. The tv
channels found are then stored as a last resort in the program list.

Add new transponder:
Select Antenna Setting -> Transponder and press the OK button. Use the

but-

tons do select „Add“ (at the bottom left of the screen) and press OK to confirm. Now
enter the data for the new transponder. The data you will see eg. on the website: www.
satindex.de. Confirm your entries with OK and go back with the

buttons to op-

tion „Select“. Confirm with OK. To search for channels of the new transponder, please
follow the instructions in the previous section.

LNB Typ

Here you need to check the LNB typ according to your antenna, set the correct fre-
quency or define yourself. The default setting (Universal) is true in most cases.

LNB Power

Here you need to check the LNB power according to your antenna, set the correct
frequency or define yourself. The default setting (13V/18V) is true in most cases.

22KHz

In case you are using two antennas connected to a 22KHz tone switch box. You can
supply either 22KHz by setting “OFF” to select antenna.

Unicable System:
In the menu item LNB Type, you can make the settings for single-cable systems (Unicable,
Unicable 2, SCD2, JESS). The set-top box is programmable for different Unicable systems.
Depending on the system, up to 32 set-top box can be connected.

Unicable A/B/C (EN 50494)
This setting is suitable for Unicable systems with up to 8 users. IF programs allow you
to select up to 8 different programs, each IF program being assigned a frequency.
Select the desired IF program (1-8). Then select the main frequency and confirm with
OK. Now enter the frequency according to your Unicable system.
SCD2 A/B/C/D/E/F/G/H (EN 50607)
This setting is suitable for Unicable 2 (JESS) systems with up to 32 users. IF programs
allow you to select up to 32 programs, each IF program being assigned a frequency.
Select the desired IF program (1-32). Then select the main frequency and confirm
with OK. Now enter the frequency according to your Unicable system.
Use the SCD2 A/B/C/D/E/F/G/H option to control up to 8 satellites.

Note:

Basically, one uses the lowest frequency for the longest cable path to the set-

top box. Note that each frequency may only be present once in your system. The fre-
quencies depend on your single-cable system and can not be allocated as desired. IF
program and IF frequency must compulsorily match your Unicable system.

Tuner

Select

Tuner 1/2

if you use the receiver in

Twin-Mode

. Here you need a coaxial line to

each of Tuner 1 and Tuner 2. With this connection method, you can record a program
while you look independently of each other. Select

Tuner 1

Tuner 2

if you use the

receiver in single mode with only one coaxial cable. Here you can only watch other pro-
grams that are on the same transponder when recording.

Signal Detection