Power Source
Check the power specification plate on the back of the Pico
Projector. Ensure that your line voltage matches with the
power adapter rating of the Pico Projector.
The Power Adaptor
accepts AC power 100-240V, 50-60 Hz.
Power Adaptor
Use only the power adaptor supplied with the Pico Projector.
Do not use the power adaptor if it has become damaged or
frayed. For a replacement power adaptor, contact your
authorized dealer.
Do not allow anything to rest on the power adaptor. Do not
place this projector where the adaptor may be abused by
persons walking on it.
Overloading
Do not overload wall outlets and extension cords as this can
result in the risk of fire or electric shock.
Liquid Spills
Do not set drinks or other liquids on top of the Pico
Projector. Do not place the Pico Projector near water, for
example, near a bathtub, washbowl, kitchen, sink, or laundry
tub, in a wet basement, or near a swimming pool. Spilled
liquids can flow inside the Pico Projector and cause damage.
Repair
Do not disassemble the Pico Projector. Take it to an
authorized technical staff when service or repair work is
required.
Technical Service
Please refer servicing to authorized technical staff under the
following conditions:
1.
When the power adaptor or plug is damaged or frayed.
2.
If liquid has been spilled into the Pico Projector.
3.
If the Pico Projector has been exposed to rain or water.
4.
If the Pico Projector does not operate normally by
following the operating instructions.
5.
If the Pico Projector has been dropped or the cabinet has
been damaged.
2
