8
IMPORTANT
READ THESE INSTRUCTIONS CAREFULLY AND NOTE THE SAFETY INSTRUCTIONS AND WARNINGS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
FAILURE TO DO SO MAY CAUSE DAMAGE TO PROPERTY AND/OR SERIOUS PERSONAL INJURY.
KEEP THIS INSTRUCTION MANUAL SAFE FOR FUTURE USE.
SAFETY INSTRUCTIONS AND WARNINGS
-
Read and understand all warnings and instructions before use. Failure to follow instructions may result in
personal injury and/or property damage.
-
Max. capacity is 450kg. Do not overload the device.
-
Do not operate the device when you are tired, under the influence of alcohol, drugs or intoxicating medica-
tion.
-
Keep children and unauthorized people away from the work area.
-
Children or disabled people are not allowed to use the device.
-
This device is exclusively designed for lifting motorcycles.
-
Use only on hard and level surfaces which are capable of sustaining the load. Keep work area clean, tidy
and well lighted.
-
Always check the device before each use. If any signs of wear or damage are noticeable, the device must
not be used.
-
Before lifting ensure the weight of the motorcycle has been fully sustained by the platform.
-
Do not put the rear wheel of the motorcycle on the ramp and do not use the ramp to sustain the weight of
the motorcycle when lifting.
-
Use appropriate straps to secure the motorcycle to the platform before lifting.
-
Do not attempt to transport a load on the lift. The lift is only used in a static position for lifting and lowering
loads. Ensure that the load remains stable at all times.
-
When the table is at its highest elevated position, do not attempt to pump the table higher as this can
damage the mechanism.
-
When lowering the table, control the speed of descent using the release valve. Lower the load slowly and
in a controlled manner.
-
When not in use, always store the device at its lowest height position.
-
Do not modify the device in any way.
-
Failure to follow these warnings or instructions may result in personal injury and/or property damage.
WARNING:
The warnings, cautions and instructions discussed in this instruction manual cannot cover all pos-
sible conditions and situations that may occur. It must be understood by the operator that common sense and
caution are factors which cannot be built into any product, but must be supplied by the operator.
PARTS
1.
Safety bar
2.
Front wheel clamp
3.
Table
4.
Removeable plate
5.
Ramp
6.
Adjustable foot
7.
Lifting cylinder
8.
Release valve
9.
Foot pedal
10.
Wheels
11.
Wheel bar
12.
Support arm
13.
Speed adjusting screw
GB
2
3
4
5
12
6
1
8
9 13
7
10
11
