4
Main Power Connection
DMX
-
512 Control
When using the Deco PQ20 with Deco Drivers the fixture is intended to be used in Ch4 or Ch7 modes. The Deco Driver
will be required to be set in Ch4 or Ch7 operating modes.
Ch7 Mode
Dimmer
Red
Green
Blue
Warm White
Strobe
Macro
Ch4 Mode
Red
Green
Blue
Warm White
Deco Driver Info
1 Red
2 V+
3 Green
4 V+
5 Blue
6 V+
7 Warm White
8 V+
Deco Driver
96W Output Driver
5
Fixture Max
per Output
Deco Driver
20W Output Driver
1
Fixture Max
per Output
Power Link
20W Output Driver
Can connect
1
unit per output port
100W Output Driver
Can connect
5
unit per output port
Ch Mode
Ch 4 or Ch7
Use Ch4 or Ch7 Mode to control the unit
Important information!
1. Deco Lighting fixtures are specifically designed to be used with a Deco Drivers.
2. Maximum Cable distance of 100ft before voltage drop. (voltage drop will cause intensity drop)
3. Max Power 20W output driver
1
unit per output
4. Max Power 96W output driver
5
units per output
5. All fixtures connected together must be same type (do not connect Variable White or Single
Color fixtures in the same output)
6. Must use Cat 6, 24 AWG or thicker to connect the fixture and fixture to fixture. (not included)
RJ45 Y jumper cable
can be connected on
ether side for input or
output .
