Megalarm MEGA 3600, Installation Manual

Page: 19 / 25

REMOTE START FEATURE PROGRAM MODE.
START FEATURE “
I
” PRORAMMING:
1. Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2. Push the Valet switch
8 times and hold it until four chirps with a long chirp is hearing then release the
valet switch. You are now in the Start feature ‘I’ programming mode.
3. Press and release the transmitter button ‘A’ corresponding to the feature ‘A’ you want to program.
Four Chirps / One Chirp / Press Three Chirps / Two Chirps /
LED four pulse LED one pulse T
ransmitte
r LED three pulse LED two pulse
Button
Factory Default
Setting
Gasoline Engine
+
1
Diesel Engine
without
Wait-To-Start Light
20 seconds warn-up
timer Diesel Engine
without
Wait-To-Start Light
15 seconds warn-up
timer Diesel Engine
without
Wait-To-Start Light
10 seconds warn-up
timer Diesel Engine
with
Wait-To-Start Light
(H5/5 White/Green
wire must be
connected)
10 minutes run time
20 minutes run time 30 minutes run time 5 minutes run time
2
Without this feature Factory alarm
disarm with channel
3 on
3
Constant parking
light output Flashing parking
light output
4
Without this feature Door lock before
start Door lock after
shut-down Door lock before
start and Door lock
after shut-down
5
6
+
Press
- +
Press button =
Activate Remote
Start.
Press
button = button =
Activate Remote
Start. Activate Remote
Start.
H5/8 White / Blue
Wire = H5/8 White / Blue
Wire = H5/8 White / Blue
Wire = +
7
3 pulse activate 2 pulse activate 1 pulse activate
Temperature-Control
Starting OFF Temperature-Control
Starting 5 F Temperature-Control
Starting – 4 F Temperature-Control
Starting – 22 F
8
+
Exit
: Turn Ignition to 'ON' position, or leave it for 15 seconds. A 3 long chirps & 3 parking light flashes to
confirm exit.
SAFE START (Child safety mode)
button twice to start the vehicle. Factory defaults setting to press the
Programming this feature to eliminate an accidental remote start, when kids enter this transmitter, it requires:
and buttons at the same time to start the vehicle. The user press the transmitter
START FEATURE “
II
” PRORAMMING:
1. Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2. Push the Valet switch
10 times and hold it until five chirps with a long chirp is hearing then release the
valet switch. You are now in the Start feature ‘II’ programming mode.
3. Press and release the transmitter button ‘A’ corresponding to the feature ‘A’ you want to program.
Four Chirps / One Chirp / Press Three Chirps / Two Chirps /
LED four pulse LED one pulse T
ransmitte
r LED three pulse LED two pulse
Button
Factory Default
Setting
19