Megalarm MEGA 3600, Installation Manual

Page: 16 / 25

5
+
Without this feature With Dome light turns
on after ignition off
(45 second door
by-pass)
6
+ Without Car-jack
mode Active Car-jack mode Passive Car-jack
mode
7
+
Panic with Ignition
off Panic with Ignition on
& off Panic with Ignition
on & off. Panic
with No time limit. Without Panic
function.
Exit
: Turn Ignition to 'ON' position, or leave it for 15 seconds. A 3 long chirps & 3 parking light flashes to
confirm exit.
3 / 30 seconds Delay Door Ajar Error Chirp:
This feature controls the error chirp that is generated if the system is armed with the door trigger active. This
useful in a vehicle that has a long dome light delays after the door has been closed. If the system is armed
before the dome light has turned off, the security system will generate the door trigger error chirp. Use this
feature to disable the door open error chirp.
With Dome light turns on after ignition off:
Some vehicles turn on the dome light when ignition key is turned off. After remote start, with alarm on, a
false alarm may occur when the run time elapses and the dome light comes on. To prevent this from
happing, program Alarm Feature
I – 5 to “With Dome light turns on after ignition off (45 second door
by-pass)”.
ALARM FEATURE “
II
” PRORAMMING:
1 Turn the Ignition switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2 Push the Valet switch
4 times and hold it until two chirps with a long chirp is hearing then release the
valet
switch. You are now in the Alarm feature
‘II’ programming mode.
3 Press and release the transmitter button ‘A’ corresponding to the feature ‘A’ you want to program.
Press
T
ransmitte
r
Button
One Chirp / LED
one pulse
Factory Default
Setting
Two Chirps / LED
two pulses Three Chirps / LED
three pulses
Four Chirps / LED
four pulses
1
0.8-second Door
lock pulses. 3.5-second Door
lock pulse. Double pulse unlock
2
Ignition controlled
door locks &
unlocks Ignition controlled
door locks only Ignition controlled
door unlocks only Without ignition
controlled door
locks & unlocks
3
Pathway illumination
feature “off” Parking light turns
“on” for 30- second
upon an unlock
signal
Parking light turns
“on” for 30- second
upon an unlock
signal & 10-second
upon a lock signal.
4
H2/5 Brown Wire =
Constant Siren
output H2/5 Brown Wire =
5-second pulse
Siren output H2/5 Brown Wire =
Random pulse Siren
output H2/5 Brown Wire =
Horn Output
Exit
: Turn Ignition to 'ON' position, or leave it for 15 seconds. A 3 long chirps & 3 parking light flashes to
confirm exit.
ALARM FEATURE “
III
” PRORAMMING:
1 Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2 Push the Valet switch
6 times and hold it until three chirps with a long chirp is hearing then release the
valet switch. You are now in the Alarm feature ‘III’ programming mode.
3 Press and release the transmitter button ‘A’ corresponding to the feature ‘A’ you want to program.
16