manualshive.com logo in svg

Mega Machine GX35, User Manual

Share
Download
Mega Machine GX35 User Manual Download Page 22

22

FUEL FILTER AND FUEL TANK

Fuel 

fi

 lter inspec

Ɵ

 on and Fuel tank cleaning

1.  Check that the engine oil 

fi

 ller cap is   ghtened securely. 

2.   Remove the fuel 

fi

 ller cap and drain the fuel into an approved  

     

 

gasoline container by   pping the engine toward the fuel 

 

fi

 ller neck.

3.  Pull the fuel 

fi

 lter out through the fuel 

fi

 ller neck by hooking the    

 

black fuel tube with a piece of wire, such as a partly straightened   

 paper 

clip.

4.  Inspect the fuel 

fi

 lter. If the fuel 

fi

 lter is dirty, wash it gently  

 

 with 

non

fl

 ammable or high 

fl

 ashpoint solvent. If the fuel 

fi

 lter is    

 

excessively dirty, replace it.

5.  Remove water and dirt from in the fuel tank by rinsing the inside of  

 

the fuel tank with non

fl

 ammable or high 

fl

 ash point solvent.

6.  Insert the fuel 

fi

 lter into the fuel tank and   ghten the fuel 

 

fi

 ller cap securely.

GASOLINE IS HIGHLY FLAMMABLE AND EXPLOSIVE AND YOU CAN BE BURNED OR SERIOUSLY INJURED WHEN HANDLING FUEL. 
•  STOP ENGINE AND KEEP HEAT, SPARKS, AND FLAME AWAY.
•  HANDLE FUEL ONLY OUTDOORS.
•  WIPE UP SPILLS IMMEDIATELY.

Summary of Contents for GX35






























Reviews:

No comments

Brands by name

Popular brands

Load more brands