manualshive.com logo in svg

Mega Machine GX35, User Manual

Share
Download
Mega Machine GX35 User Manual Download Page 12

12

SETTING ENGINE SPEED

Standard/Tiller type:

Posi  on the thro  le lever for the desired engine speed.

 

The thro  le lever shown here will be connected to a remote control 

on the equipment powered by this engine. Refer to the instruc  ons 

provided with the equipment for remote control informa  on and for 

engine speed recommenda  ons. 

Pump type:

Posi  on the thro  le lever for the desired engine speed. 

For engine speed recommenda  ons, refer to the instruc  ons provided 

with the equipment powered by this engine.

STOPPING THE ENGINE

Standard/Tiller type:

To stop the engine in an emergency, simply turn the engine switch on 

the equipment to the OFF posi  on. Under normal condi  ons, use the 

following procedure. 

1.  Move the thro  le lever to the MIN. posi  on. 

The thro  le lever shown here will be connected to a remote control 

on the equipment powered by this engine. Refer to the instruc  ons  

provided with the equipment for remote control informa  on and for 

engine speed recommenda  ons.

2.  Turn the engine switch on the equipment to the OFF posi  on.

Summary of Contents for GX35






























Reviews:

No comments

Brands by name

Popular brands

Load more brands