14
Steps:
1.
Take the grip, spring, plastic lock cover down. You should remove the dowel first
when you take the plastic lock cover down.
2.
Remove the 3 screws (Picture 2).
3.
Remove the chain and replace the rubber mat.
4.
Check the chain and fix all parts.
5.8 Pressure regulation of the rollers
The pressure even or not can affect the quality of lamination. We will fix the pressure well
before delivery, you should adjust it after a period of use.
Notice: Pressure adjustment of the rollers should under running condition. In non-work sate, the
un-parallelism of the rollers may be occurred by the thread clearance of stroke adjustment, which
cannot affect lamination.
Right and left case of the machine
1 lifting link 2 Transversal bevel gear 3 Height/Pressure regulate wheel
4 Pressure regulate bracket 5 Pressure regulate iron 6 Upper roller
7 Lower roller 8 Pressure regulate locating shaft 9 Vertical bevel gear 10 Spring
5.8.1 Check-up
1.
Open the left and right cases.
2.
Check left and right pressure regulate bracket are loose or not and fix them well.
3.
Check the vertical bevel gear loose or not of both sides. If the left side is not tight, you
should remove the transversal bevel gear of left side fist, then the screw. Tighten the
