8
9.Heating indicator 10.Backing sheet roll 11.Feeding roll 12.Infrared sensor beam
13.Back work table 14.Finished products roll 15.Back junction plate
4 Control panel
1.
Hot lamination indicator
2.
Cold lamination indicator
3.
Prepare indicator
4.
Real-time temperature
5.
Temperature regulation
6.
Hot/cold lamination switch
7.
Forward/Backward switch
8.
Continuous/Inching switch
9.
Speed controller
10.
Predetermined temperature
Temperature regulation: Choose hot lamination function, the display screen will light
up. You can adjust the predetermined temperature (See 10) through the following
step. Firstly, press "
■
set" button once. Secondly, press "
▲
up “or
"
▼
down " once
to adjust 1
℃
each time. Thirdly, press "
■
set" button again to confirm the setting.
The predetermined temperature is 90
℃
for hot lamination, 45
℃
for cold lamination.
You can regulate a higher temperature for thick materials and lower temperature for
thin materials.
Machine can only be running forward under "Continuous" condition. The machine
can run forward or backward under "Inching" function.
Clockwise turn the speed controller can accelerate the speed and vice versa. In order
to ensure the quality of lamination, please choose the proper speed. Please turn to
"Inching" function, when finish the lamination. Do not use the speed button as the
start or shut controller.
