9
5 General function
5.1 Power supply
5.1.1 Power wire
Please use the standard main leads and check your power supply are suit for the fixed
power of the laminator.
5.1.2 Main switch
Press the main switch on the back of the machine, the indicator will light up and power on
and vice versa.
5.1.3 Fuse tube
There are 2A and 7A protector tubes inside this laminator. 2A protector tube controls the
circuit components and 7A protector tube controls the heater.
5.2 Foot switch
Foot switch can control the motor. Please fix the screw of foot switch at the back of the
machine before use. Choose "Inching" function and adjust the speed to "2" level, when
you use the foot switch. Push the foot switch to make the motor running.
5.3 Emergency stop button
Press the emergency stop button to stop the laminator when there is an emergency
situation. Then the machine will run again and the button will bounce up, when you
clockwise rotate.
5.4 Rise up and down of the upper roller
Clockwise rotate the hand wheel to rise up the roller and vice versa. When the two rollers
joint together, you can feel the wheel at the pressure free position. Continue to
counterclockwise rotate the hand wheel can increase the pressure, you can adjust the
pressure depending on your material.
5.5 Heating pipe installation
