Meec 001-097 User Instructions Download

Page: 25 / 28

WARNING!

Release the trigger and unplug the tool from its power outlet before adjusting the tool or

installing accessories�

Adjusting the auxiliary handle

The auxiliary handle can be placed in a variety of positions� To adjust the auxiliary handle, turn the
handle anti/clockwise to loosen the band� Slide the handle to the desired position then turn the
handle clockwise to secure it in place�

oPERATIoN

Note:

This tool includes an internal safety clutch that helps prevent tool damage by disengaging the

drill function if the drill locks in place�

Adjust the mode selector to the desired function before using the rotary hammer drill� Press the
release button and rotate the mode selector until it clicks in place with the desired function at
the indicator�

NoTE:

• Only move the mode selector once the rotary hammer drill has stopped� Attempting to move the

mode selector while the rotary hammer drill is engaged will result in abrupt tool rotation and
can cause property damage�

• When moving the mode selector, make sure it clicks into the desired position� If not actively

engaged, the mode selector could slip out of position resulting in tool damage�

ADJUSTING THE DIffERENT fUNcTIoNS of THE RoTARy HAmmER DRILL

A�  Chiselling
B�  Lock-on button
C�  Impact drilling
D�  Mode indicator
E�  Angle adjustment

Impact drilling

Set the mode selector in impact drilling mode (C)�

chiselling

Set the mode selector in chiselling mode (A)�

Adjusting the angle of the chisel

Rotate the mode selector to the angle adjustment mode (E)� You can now rotate the chisel to the
desired angle for chiselling� When you have finished adjusting the chisel, rotate the mode selector
to the hammer setting to begin chiselling�

1�

Choose a work area that is clean and well lit� Keep children and pets away from the work area
to prevent distraction and injury�

2�

Route the power cord along a safe route to reach the work area without creating a tripping
hazard or exposing the power cord to possible damage� The power cord must reach the work
area with enough extra length to allow free movement while working�

3�

Secure loose work pieces using a vice or clamps to prevent movement while working�

4�

There must not be any objects, such as water pipes or electricity lines, nearby that will present
a hazard while working�

PREPARATIoN of WoRK PIEcE AND WoRK AREA

• Choose a work area that is clean and well lit� Keep children and pets away from the work area

to prevent distraction and injury�

• Route the power cord along a safe route to reach the work area without creating a tripping

hazard or exposing the power cord to possible damage� The power cord must reach the work
area with enough extra length to allow free movement while working�

• Secure loose work pieces using a vice or clamps (not included) to prevent movement

while working�

• There must not be any objects, such as pipes, nearby that will present a hazard while working�

mASoNRy DRILLING

changing drill bits
NoTE:

Wear heavy-duty work gloves to provide protection when inserting and removing drill bits� Drill

bits become very hot during use� Do not remove drill bits until the bit has cooled� Do not strike bits
that have become stuck with a hammer�
1�

Release the chuck�

2�

Check that the drill bit is secured in place� You should not be able to pull it out of the chuck�

3�

Grease the drill bit shank before installing�