Meec 001-097, User Instructions, Page: 24 / 28

EN EN
42 43
SymBoLS
Warning!
Read the operating instructions carefully before use
Double-insulated
Volts, alternating current
A
Amperes
Risk for injury to eyes� Wear ANSI-approved safety goggles with side shields�
Risk of hearing loss� Wear hearing protection�
Risk of electric shock� Properly connect power cord to appropriate outlet�
TEcHNIcAL DATA
Rated voltage 230 V / 50 Hz
Power 1,050 W
Unloaded rpm 480 rpm
Impact Rate 3,780 strokes/min
Wood Capacity 40 mm
Concrete Capacity 38 mm
Steel Capacity 13 mm
Chuck SDS-max
Sound pressure level, LpA
96 dB(A), K=3 dB
Sound power level, LwA 107 dB(A), K=3 dB
Maximum vibration level 15 m/s², K=1�5 m/s²
Always use hearing protection!
The declared vibration value, which has been measured in line with a standardised testing method,
can be used to compare different tools with each other and for a preliminary assessment of exposure�
Warning! The actual vibration level during the power tool’s use can vary from the specified total
value depending on how the tool is used� You must therefore identify the safety measures required to
protect the user based on an estimate of exposure during normal operating conditions (taking into
account all parts of the work cycle as well as the time the tool is switched off and when running idle,
as well as start-up time)�
DEScRIPTIoN
1� Auxiliary Handle
2� Cover for filling of grease
3� On/Off Switch
4� Mode selector
5� Chuck
ASSEmBLy
NoTE: To prevent serious personal injury as a result of accidental operation: Release the trigger and
unplug the tool from its power outlet before adjusting the tool or installing accessories�