ENGLISH
64
9.
Let the motor warm up for 5 to 10 seconds. Turn the choke control to C (Fig. 11).
10.
Stand in your working position and hook the harness to the attachment.
NOTE!
If the motor floods, put the choke to C. Put the throttle lever in full throttle position (Fig. 10). Pull the
starter cord quickly. The motor should start after 3–8 pulls.
You do not need to use the choke if the motor is hot. Put the throttle in full throttle position (Fig. 10)
and start the machine with the choke control in position B (Fig. 11).
Stopping the motor
1.
Put the throttle in idle position. Let the motor idle to cool down.
2.
Hold down the ignition switch at stop position until the motor has come to a complete standstill.
Holding the leaf blower/vacuum
Stand in your working position before working with the machine (Fig. 13). Make sure you are wearing
suitable clothing such as boots, goggles, earmuffs, gloves, long trousers and a long-sleeved top.
Fig. 11
Choke
Primer
Summary of Contents for 729-159
Page 72: ......
