EN
51
USE
INTENDED USE
• This drill driver is intended for drilling and screwing/unscrewing screws in wood and metal.
• To ensure safe use it is very important to read, and follow, all the user instructions before using
the drill driver for the first time.
• The tool, accessories and battery charger must only be used in the intended manner and in
accordance with the directions in these instructions.
• This drill driver is only intended for private home use, not for commercial use. The drill driver must
not be modified or used for any other purposes than the ones described in these instructions.
CHARGE THE BATTERY
NOTE:
• Charge the battery fully before using it for the first time. In order for the battery to attain full
capacity, it must be charged and discharged several times.
• Avoid charging the battery for short periods. Only charge the battery when it is fully discharged.
• The adapter, charger and battery become hot when charging. This is quite normal.
1.
Remove the battery by pressing down the lock button on the battery and pulling out the battery.
2.
Connect the charger to the battery.
3.
Connect the charger to a mains outlet.
– The status lamp lights up during charging. It normally takes 3–5 hours to fully charge the
battery.
– When the green status lamp comes on, the battery is fully charged.
4.
Unplug the charger from the mains after charging and remove the battery from the charger.
5.
Slide the battery underneath the handle until it clicks in place.
Summary of Contents for 060-201
Page 57: ......
