63
ACCESSORIES
USE
Round saw blade of high speed
steel.
Cut and remove damaged parts of
plasterboards.
Make two parallel cuts and break off
the piece in between. Place the cable
in the slot and cover with plaster.
Hardened steel scraper
Remove floor coverings and scrape off
glue residues.
Sanding plate and sandpaper
Course sandpaper, grade 40
–80.
Fine sandpaper, grade 120-180.
WARNING!
Overheat/overload protection
NOTE!
The tool has an overheating protection that will trigger if the tool is overloaded, or if the battery
temperature comes outside the permitted range (0
–70°C). If the tool stops automatically, switch it off and
allow the battery to cool before using it again.
MAINTENANCE
1.
Always unplug the power cord before
adjusting or maintaining the tool. A damaged
power cord must be replaced by an
authorised service centre or qualified person
to ensure safe use.
2.
Pull out the plug immediately if it is
damaged.
3.
Do not expose the tool to rain or damp
conditions.
Summary of Contents for 029-052
