EN
50
3. Store the product and all the accessories in a dark, dry and frost-free, well ventilated place.
4. Store the product out of the reach of children. A suitable storage temperature is 10 to 30°C.
5. Store the product protected from dust.
TRANSPORT
1. Switch off the product and pull out the plug.
2. Use transport protection where appropriate.
3. Always carry the product with the handle (7a).
4. Protect the product from vibrations and knocks during transport.
5. Secure the product so that it cannot tip over.
6. Size of product: 1.25 x 0.68 x 1.35 m.
REPAIRS
The product does not contain any parts that can be repaired by the user. Take the product to an
authorised service centre, or other qualified personnel, to be checked and repaired.
TROUBLESHOOTING
Problem
Possible cause
Action
The product does not
start.
The plug is not plugged in.
Plug in the plug.
The power cord or plug is damaged.
Contact an authorised
electrician.
Other electrical fault
Contact an authorised
electrician.
The product does not work
at full power.
Unsuitable extension cord.
Use a suitable extension cord.
Voltage too low (for example when
using generator).
Use another power source.
Unsatisfactory results.
The mixer blades are blunt/
damaged.
Replace.
Unsuitable blades for the actual
material.
Use a suitable mixer blades.
The product vibrates
abnormally and/or makes
a lot of noise.
The mixer blades are blunt/
damaged.
Replace.
Loose screw unions.
Tighten all screw unions.
Summary of Contents for 024342
Page 4: ...1 Parts bag 2 1 2 3 4 5 8 9 10 3a 3b 3c 6 7a 7c 7b...
Page 6: ...5 3 2 1 1 2 5c 5a 5b 4 5a 2x Mounting set bag A 5c 2x 4 1x 5b 27 4x...
Page 10: ...11 D B A 8a 8 C 10 8 1x Mounting set bag E A 8 2x B 8 2x 10 1x C M8 2x D M8x30mm 2x...
Page 13: ...17 3a 3b 18 1 1 2 to 3 4 16 10b 1 2 3 4 1 3 2 9d 9...
