Meec tools 020962, Operating Instructions Manual

Page: 37 / 77

EN
37
Planing width 45 cm
Rebate depth 0-3 mm
Max feed speed 6 m/min
Fence 520 x 102 mm
Fence angle 90°–135°
Dust extraction adapter diameter
100 mm (ext.), 94 mm (int.)
Number of planer heads 2
Cutter shaft diameter 50 mm
Sound pressure level, LpA: 92.9 dB(A), K= 3 dB
Sound power level, LwA: 105.9 dB(A), K= 3 dB
Weight
26.5 kg
Cord length 1.8 m
Always wear ear protection!
The declared values for vibration and noise, which
have been measured according to a standardised
test method, can be used to compare different
tools with each other and for a preliminary
assessment of exposure. The measurement
values have been determined in accordance
with EN 61029-2-3:2011.
Warning!
The actual vibration and noise level when
using tools may differ from the specified
maximum value, depending on how the tool is
used and the material. It is therefore necessary
to determine which safety precautions are
required to protect the user, based on an
estimate of exposure in actual operating
conditions (taking into account all stages of
the work cycle, e.g. the time when the tool is
switched off and when it is idling, in addition to
the start-up time).
DESCRIPTION
Planer and thicknesser with adjustable jointing
fence and thickness table with swivel fence
for bevelling. The thickness table is made of
aluminium and the planer has pull-out tool
shelves.
The product is not suitable for:
-
workpieces with reinforcement
- workpieces with cavities, knots or cutouts
- curved workpieces.
Parts
1. Power switch
2. Overload switch
3. Rubber feet
4. Extension rail for thickness planing
5. Knob to adjust depth (surface planing)
6. adjustable feed table (surface planing)
7. Dust extraction adapter
8. Fence
9. Cutter guard
10. Lock knob for cutter guard
11. Handle to adjust height (thickness planing)
12. Lock knob for cutter guard angle
13. Fixed outfeed table (surface planing)
14. Cutter guard arm, complete
15. Safety switch
16. Spindle for adjusting height
17. Dust extraction funnel
18. Thickness planing table
FIG. 1
ASSEMBLY
UNPACKING
1. Planer and thicknesser (1)
2. Fence (1)
3. Cutter guard arm (1)
4. Dust extraction adapter (1)
5. Dust extraction funnel (1)
6. Feeder block (2)
7. Height adjustment handle (1)
8. Lock knob for cutter guard arm (1)