Meec tools 020-180, Operating Instructions Manual

Page: 38 / 45

ENGLISH
38

The maximum cut depth is 55 mm.

If the electrical cable of this tool is damaged it must be replaced by the manufacturer or the
customer service

department or a similarly qualified specialist in order to avoid dangers.
Further special safety instructions for circular saws

Only use the recommended saw blades which correspond to EN 847-1.

Do not use sanding belts.

Only use the manufacturer’s original saw blades with the number Ø 160 mm, 5500/min, 160 x 20 x
2.0.

Do not use any saw blades which do not correspond to the characteristics described in these
operating instructions.

Saw blades may not be brought to a stop by pressure on the machine from the side.

Make sure that the saw blade is tightly assembled and turns in the correct direction.
Hold the equipment on the insulated handles, when you undertake work in which the tool being used
could come into contact with hidden electrical wires, or its own cable. Contact with a live power source
can electrify the metal parts of the tool and lead to an electrical shock.
Correct use

The machine may only be used when it is in perfect condition according to its intended area of use
and the instructions specified in the Operating Instructions, and only by individuals who are fully
aware of the risks that are associated with the use of the machine. All malfunctions, particularly
those that affect the machine’s safety, should therefore be rectified immediately.

Any other type of use is prohibited. The manufacturer is not responsible for injuries caused by
unauthorised use. The responsibility lies solely with the operator.

Safety, operating and maintenance instructions from the manufacturer, as well as the technical
data provided in the sections regarding calibration and dimensions, must be respected.

Relevant accident prevention regulations and other generally accepted technical safety rules must
also be respected.

The machine may only be used and maintained by individuals who are familiar with the machine
and who have been trained regarding its operation and procedures. Arbitrary modifications to the
machine exempt the manufacturer from all liability for any injuries.

The machine must only be used together with original equipment.
Other dangers

The machine has been manufactured with the aid of modern technology and in accordance with
accepted safety rules. However, certain dangers may still exist.

Only process selected wood without any defects such as: Knotholes, edge cracks, surface cracks.
Wood with defects of this type is at risk of shattering and can be dangerous.

Wood that has not been glued correct can shatter when processed, due to centrifugal forces.

Long hair and loose clothing can constitute a danger. Wear personal protective equipment such as
a hair net and close-fitting workclothes.

Sawdust and wood chips can be dangerous. Wear personal protective equipment such as safety
glasses and a dust mask.

The use of incorrect or damaged power cords can result in injuries caused by electric shocks.

Even when all safety measures have been implemented, there are still some dangers that may not
be apparent but are nevertheless present. The remaining dangers can be minimised by following
the instructions in the Operating Instructions.

Use the tool recommended in this handbook. In this way you will ensure that your plunge saw
works with the optimum level of performance.

When cutting aluminium and plastic, always use suitable securing devices. All workpieces must be
properly secured.

Avoid accidental starting. Do not press the start button at the same time as inserting the plug in the
socket.