EN
38
Risk of personal injury from
moving parts. Never clear
the rotor housing with your
hands.
Max working width.
Idling speed.
Recycle discarded product
in accordance with local
regulations.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Rated voltage
18 V / 4.0 Ah
Output
1.2 kW
Battery
2 Ah Li-Ion
Charging time
Approx. 4 h
Speed
2100 rpm
Protection rating
IPX1
Working width
280 mm
Max snow height
150 mm
Max ejection length
5 m
Sound power level, LwA
68 dB(A), K = 3 dB
Measured sound power level, LwA
82 dB(A), K = 3 dB
Guaranteed sound power level, LwA
90 dB(A), K = 3 dB
Vibration level
1 m/s², K = 1.5 m/s²
Weight
6 kg (without battery)
Always wear ear protection.
The declared values for vibration and noise,
which have been measured by a standardised
test method, can be used to compare different
tools with each other and for a preliminary
assessment of exposure. The measurement
values have been determined in accordance
with EN 60745-1:2009.
WARNING:
The actual vibration and noise
level when using power tools may differ from
the specified maximum value, depending on
how the tool is used and the material. It is
therefore necessary to determine which safety
precautions are required to protect the user,
based on an estimate of exposure in actual
operating conditions (taking into account all
stages of the work cycle, e.g. the time when
the tool is switched off and when it is idling, in
addition to the start-up time).
DESCRIPTION
1. Battery holder
2. Power switch
3. Motor housing
4. Snow screw
5. Lock knob, for locking top and bottom tube
6. Lock knob, for adjusting support handle
7. Support handle
8. Start inhibitor
FIG. 1
ASSEMBLY
ASSEMBLY OF TOP AND BOTTOM
TUBE
1. Press the cable in the tube and push the
bottom tube in the top tube.
2. The screw holes should be opposite
each other so that the screw easily goes
through. Make sure that the cable does
Summary of Contents for 009531
Page 4: ...8 7 6 5 2 1 4 3 1 2 ...
Page 5: ...4 5 3 ...
