EN
35
CLEARING THE ROTOR HOUSING
Follow the instructions below to clear the rotor
housing:
– Switch off the machine and pull out
the plug.
– Wait 10 seconds to make sure that
the snow screw has completely
stopped.
– Use a suitable tool to clear the rotor
housing and/or release the snow
screw. Never use your hands.
WARNING!
Never clear the rotor housing with your hands.
If your hands or feet come into contact with the
snow screw there is a risk of serious personal
injury.
MAINTENANCE AND STORAGE
• Check at regular intervals that all unions
are intact and properly tightened, and
that the machine is in safe working
condition.
• Follow all the instructions and safety
instructions, including the storage
instructions.
• Stickers with safety information and
instructions must always be clean and
legible. Replace them if necessary.
• When not in use, store the machine in a
dry place out of the reach of children.
USING AND LOOKING AFTER
POWER TOOLS
• Do not force the power tool. Use the
correct power tool for the planned work.
The tool does the job better and safer
when used at the rate for which it was
designed.
• Do not use the tool if it cannot be
switched on and off with the power
switch. Power tools that cannot be
controlled with the power switch are
dangerous and must be repaired.
• Pull out the plug and/or remove the
battery before making any adjustments,
changing accessories or putting the power
tool away. These safety precautions reduce
the risk of accidently starting the tool.
• Store power tools out of the reach of
children when not in use. Never allow
children, or anyone who is unfamiliar with
the power tool and these instructions, to
use the tool. Power tools are dangerous if
used by inexperienced persons.
• Keep the power tool properly maintained.
Check that moving parts are properly
adjusted and do not jam, and that no
parts are incorrectly fitted or damaged.
Check for other factors that could affect
functionality. If the power tool is
damaged, it must be repaired before
being used again. Many accidents are
caused by poorly maintained power tools.
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to jam
and are easier to control.
• Use the power tool, accessories etc., in
accordance with these instructions, taking
into account the actual working
conditions and the work that is to be
done. It can be dangerous to use power
tools for purposes other than those for
which they are intended to be used.
USING AND LOOKING AFTER
BATTERY-POWERED TOOLS
• The battery must only be charged with the
charger recommended by the
manufacturer. A charger intended for one
type of battery can result in a fire risk if
used with another type of battery.
• Only use power tools with the specified
batteries. The use of other batteries can
cause accidents or a fire.
• When the battery is not being used it
must be kept away from other metal
objects such as paper clips, coins, keys,
nails, screws and other metal objects that
Summary of Contents for 009531
Page 4: ...8 7 6 5 2 1 4 3 1 2 ...
Page 5: ...4 5 3 ...
