EN
29
• When the compressor is connected to a
power source and the switch is in the ON
position the compressor automatically
runs this cycle.
– Do not touch moving parts.
– Keep your body, hair, clothing and
jewellery away from moving parts.
– Do not use the compressor without
all the guards and casing in place.
– Do not stand on the compressor.
• The compressor has a safety valve to
guarantee the safe use of the machine if
there is a fault on the switch.
• The red line on the pressure gauge
indicates the maximum operating
pressure of the tank. This does not apply
to the set pressure.
• When connecting a compressed air tool to a
compressed air pipe from the compressor, it
is absolutely essential to cut the flow of air
from the compressed air pipe.
• When using compressed air for different
applications (pumping air, pneumatic tools,
spray painting, cleaning with water-based
detergent, etc.) the user must respect and
be familiar with the applicable safety
regulations for each application.
• Do not exceed the maximum pressure
recommended by the manufacturer for
connections or accessories used with this
compressor.
• Check that the air consumption and
maximum operating pressure for the tool
and connecting tube (with compressor)
correspond with the setting on the
pressure regulator and with the
performance of the compressor.
Neither should people without experience
and knowledge use it unless they receive
assistance or instructions for use of the
appliance by a person who takes
responsibility for their safety.
• Keep children under supervision to make
sure they do not play with the machine.
• Do not place flammable objects or objects
made of nylon or fabric in the vicinity and/
or on the compressor.
• Do not clean the machine with flammable
liquids or solvents. Only use a damp cloth
and make sure that you have removed the
plug from the power socket.
• The compressor is designed to compress
air. The machine must not be used for any
other type of gas.
• The compressed air obtained from this
machine cannot be used in the
pharmaceutical sector, food sector or in
healthcare without first undergoing
specific treatments and cannot be used to
fill oxygen tanks for diving.
• To avoid serious burn injuries, do not
touch the top of the cylinder or tube
during or immediately after use.
• Do not lift the compressor with the
telescopic handle (G). This handle is only
intended to be used to pull the unit.
FUNCTION
• To avoid overheating the electric motor
the compressor runs intermittently (must
not be used for more than 25% of function
cycle). If the compressor pumps air for
more than 25% of an hour the capacity of
the compressor will be less than the
pumping required by the application.
Always adjust the air flow needed by the
accessory or connection to the amount of
air delivered by the compressor. The
overheating protection on the motor trips
in the event of overheating and
automatically switches off the power. The
motor restarts automatically when the
temperature returns to normal.
