EN
30
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Output
1100 W
Speed (no load)
3400 rpm
Max. operating pressure
10 bar
Air tank
5 l
Air connection
1/4"
Weight
10.6 kg
Sound pressure level, LpA 77 dB(A), K= 3 dB(A)
Sound power level*, LwA 95.1 dB(A), K= 3 dB(A)
Sound power level**, LwA 97 dB(A), K= 3 dB(A)
* Measured, ** Guaranteed
Always wear ear protection.
The declared values for vibration and noise, which
have been measured by a standardised test
method, can be used to compare different tools
with each other and for a preliminary assessment
of exposure. The measurement values have been
determined in accordance with
EN 1012:2010.
WARNING!
The actual vibration and noise level when
using tools may differ from the specified
maximum value, depending on how the
tool is used and the material. It is therefore
necessary to determine which safety
precautions are required to protect the user,
based on an estimate of exposure in actual
operating conditions (taking into account all
stages of the work cycle, e.g. the time when
the tool is switched off and when it is idling,
in addition to the start-up time).
DESCRIPTION
1. Switch
2. Pressure gauge
3. Control dial
Symbols
The following symbols can be of importance
for how you should use your power tool. Make
sure you understand the symbols and their
significance.
Read the instructions.
Approved in accordance with
the relevant EU directives.
Risk of burns.
Warning – live parts.
Risk of automatic start.
Wear safety glasses.
Wear ear protection.
Sound power level.
Recycle as electrical waste.
97
