Guidance and manufacturer’s declaration – electromagnetic immunity
The model MS-74012 Pulse Oximeter is intended for use in the electromagnetic
specified below. The customer of the user of the MS-74012 Pulse Oximeter should
assure that it is used in such an environment.
Guidance and manufacturer’s declaration- electromagnetic immunity-
For EQUIPMENT and SYSTEM that are not LIFE-SUPPORTING
Immunity test
IEC 60601
test level
C o m p l i a n c e
level
3Vrms
150kHz
to 80MHz
3V/m
80MHz
to 2.5GHz
3V
3V/m
Electromagnetic
environment-guidance
Portable and mobile RF
communications equipment
should be used no closer to
any part of the model MD300M
Pulse Oximeter, including
cables, than the recommended
separation distance calculated
from the equation applicable to
the frequency of the transmitter.
Recommended separation
distance
Where P is the maximum output
power rating of the transmitter
in Watts (W) according to the
transmitter manufacturer and d
is the recommended separation
distance in metres (m).
b
Field strengths from
fi
xed RF
transmitters, as determined
by an electromagnetic site
survey,
a
should be less than
the compliance level in each
frequency range.
b
Interference may occur in the
vicinity of equipment marked
with the following symbol:
80MHz to 800MHz
800MHz to 2.5GHz
Conducted RF
IEC 61000-4-6
Radiated
RF IEC
61000-4-3
d
=
3.5
V
1
P
d
=
3.5
E
1
P
d
=
7
E
1
P
- 27 -
INSTRUCTION MANUAL
