- 16 -
6.2.5 In the data management screen, the upper half screen will display the maximum,
minimum and average values of SpO2 and PR for the current ID. Refer to Fig.6-11.
Fig.6-11
Measure...
006
Min
93
065
073
087
97
099
Avg
Max
6.3 System Setting
From the main menu, select and enter the System Setting screen refer to Fig.6-12&6-13.
Press the Up or Down button to pick the different sub-items and press the Select button to
enter.
Pick the Brightness sub-item and enter it from the System Setting screen, and set the
brightness level and brightness time.
Brightness level:
1-7
Bright time:
ON, 15, 30, 45, 60, 75, 90,105,120 seconds.
Fig.6-12
Fig.6-13
Blue Tooth
Beep Setting
Display Mode
Keyboard Lock
System Setting
Select
Return
Brightness
About
Default Setup
System Setting
Select
Return
Power Auto
6.3.1 Brightness
6.3.2 Bluetooth(Reserved)
6.3.4 Display mode
6.3.3 Beep setting
Note: The brightness cannot be set in the charging process.
Enter the Beep setting screen from the System Setting screen, and set the beep level and on/off.
Beep level:
1-7
Beep(switch):
on or off.
Enter the Display Mode screen from the System Setting screen, and select the display mode
for measurement screen from Wave and Digital.
Select ‘Wave”, SpO
2
plethysmogram will be displayed on the lower screen of the
measurement screen.
PULSE OXIMETER
